48VDC Hybrid Solar Power System for Solar Outdoor Lighting, with Remote Monitoring System Operation

48VDC Hybrid Solar Power System for Solar Outdoor LightingApplication:Power plant or substation power for controlling, protection and automatic device, emergency lighting, communications, steam turbine DC oil pump and so on independent DC systems. It can provide reliable power supply in the case of a power failure completely in

Featured Products

48VDC Hybrid Solar Power System for Solar Outdoor Lighting

Application:
Power plant or substation power for controlling, protection and automatic device, emergency lighting, communications, steam turbine DC oil pump and so on independent DC systems. It can provide reliable power supply in the case of a power failure completely in plant or substation. The traditional DC systems connect battery pack and run with float charging mode. The new DC system run with silicon controlled rectifying power supply for battery.

48VDC Hybrid Solar Power System for Solar Outdoor Lighting, with Remote Monitoring System Operation

 

Key Features:

1.Adopt advanced MCU microprocessor control technology
2.Advanced MPPT Technology.High converting efficiency higher than 97% for
  minimizing energy loss.
3.Reversed current protection at night.over voltage and reverse polarity protection
4.Capable of selection different charging mode fo various types of batteries
5.Protection degree:IP55
6.Industy-leading power density compact size and high reliability
7.Doorframe designed with waterproof structure, posted on the seal and equipped  with wateerproof lock in the door double insulation design
8.Cabine adopt quality galvanized wheet or aluminum coated steel sheet as material,   surfce coating anti-UV power
9.Suitable for outdoor installation
10.With remote monitoring system operation

 

Fine dust-proof, water-proof features
According to the overall standard of design dust-proof and water-proof IP55
1.With sun protection, heat insulation, roof ventilation
2.With waterproof and the filtration dust inlet, the cabinet front door shutters


Working Principle Show:

48VDC Hybrid Solar Power System for Solar Outdoor Lighting, with Remote Monitoring System Operation
48VDC Hybrid Solar Power System for Solar Outdoor Lighting, with Remote Monitoring System Operation


 

Installation Case in Communication Base Station:

48VDC Hybrid Solar Power System for Solar Outdoor Lighting, with Remote Monitoring System Operation


Detailes of SHW48500 Solar DC Power System:

SHW48500 Solar SystemRectifier Module(1-10)     MPPT Solar Charge Controller(1-10) 
INPUT
MPPT Range @Operating Voltage 60 ~150VDC
Maximum PV Array Power3000W
Maximum Input Current62A
OUTPUT
Nominal Battery Voltage 42-58VDC
Maximum Charge Current 50A(max:61A)
Maximum Efficiency98%
Charging MethodThree stages: bulk, absorption and floating
PROTECTION
Overload Protection > 110% : audible alarm 
Overcharge ProtectionYes
Polarity Reversal Protection @Solar Cell & BatteryYes
INDICATORS
LCD Panel LCD panel indicating solar power, load level, battery voltage/capacity, charging current, and fault  conditions
LED DisplayThree indicators for solar, charging, and load status
Rectifier Module
Rated input voltage220V
AC input Voltage range AC 90-290V
input Frequency range 45-65HZ
Power factor≥0.99
Efficiency>92% 
Rated output voltage48V
Rated output current 0-50A
Voltage range42-58V
WIND CONTROLLER: 
Input Power1KW/2KW
Input Voltage150-300VAC
Output Voltage48VDC
Ouput Current30A/50A
ENVIRONMENT
Humidity0 ~ 100% RH (No condensing)
Operating Temperature -20°C to 55°C
Storage Temperature-40°C to 75°C
Altitude0 ~ 3000 m
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours